Imprimir

Home fibre


Fibre Optic for DTT and SAT distribution systems in residential buildings
From our extensive experience in signal management, Fracarro introduces our new Home Fibre, a highly innovative solution, designed
to enable fibre optic DTT and SAT distribution systems in residential buildings, from the antenna to the wall outlet.

Transmitter
Our 5mW optical transmitter works in the second optical transmission window (1310nm) and manages the SAT signals - from a traditional LNB and dish combination - including full bandwidth DTT.
Equipped with automatic gain control (AGC), up to a maximum of 7 transmitters can easily be connected together using the typical cascade distribution infrastructure, serving up to 896 wall outlets per trunk.
   
Receivers
Our range of optical receivers includes several options, tailored to different system requirements: from the Quad with 4 universal outputs for direct connection to the TV, to the Quattro with five independent outputs (HL, VL, HH, VH and TV) for multiswitch systems. There is also a version available with a single terrestrial output.
   
Splitters, taps and optical cables
Characterised by their compact size, the Home Fibre splitters and taps distribute signals throughout the building on a single-mode fibre optic cable (operating wavelength 1260nm - 1590nm).
The innovative “MINI” optical connector, just 3mm in diameter, ensures that the wiring is easy in any installation environment. The cables are supplied pre-terminated and the optical connections are protected by suitable caps.
   
Advantages of Home Fibre
Reliability
Enables the transfer of signals without loss or degradation over long distances (attenuation 0.3dB/Km).
Immune to electrical and environmental interferences and is therefore ideally suited for those particularly difficult installations.
  Flexibility
Enables complex systems with a high number of outlets to be designed easily (1 TX for 128 outlets).
Compatible integration with existing coax systems.
Cascadeable distribution typical of multiswitch topography (tree & branch or star wired).
  Ease of Installation
Simplifies cabling due to the extremely small cables and connectors (only 3mm).
Use of traditional dish and LNB array.
No specialised optical alignment equipment required.

 Download the brochure